Absorbent Glass Mat (AGM) batteries are renowned for their durability and reliability in various applications, from automotive to marine and renewable energy systems.However, even these robust batteries can develop faults over time.
How Do You Test an AGM Battery
Testing an AGM battery can be done using simple tools such as a multimeter or a more advanced battery tester like the BST600.
Multimeter
Locate the Battery
AGM batteries are typically located under the hood or in the trunk of your car. Some vehicles may have them under the rear seats or in a special compartment. Consult your vehicle’s manual if you’re unsure.
Set Up the Multimeter
Turn your multimeter to the DC voltage setting, ideally to the 20V range. This setting allows you to measure the battery’s voltage accurately.
Connect the Probes
Attach the positive (red) probe to the positive terminal of the battery and the negative (black) probe to the negative terminal. Ensure the connections are secure to avoid inaccurate readings.
Read the Voltage
A fully charged AGM battery should read between 12.8 to 13.2 volts. If the reading is below 12.4 volts, the battery may need charging or could be faulty. Readings below 12.0 volts often indicate a deeply discharged or damaged battery that may require replacement.
BST600 Battery Tester
The BST600 is a specialized tool designed for automotive batteries, including AGMs, providing a detailed analysis of the battery’s health.
Attach the clamps to the battery terminals, ensuring a secure connection. Red to positive and black to negative, as usual.
On the device, select the AGM battery test option. The BST600 is programmed to handle various battery types, including AGM, making it versatile and user-friendly.
The BST600 will guide you through the process and provide a comprehensive report on the battery’s voltage, cold cranking amps (CCA), and overall health. It can also detect internal resistance, which is crucial for diagnosing issues like sulfation.
Look for high state of health and charge percentages. If results indicate poor health or low charge, it might be time to replace the battery. The device provides a detailed health report, making it easier to understand the battery’s condition.
Related Reading: This is the Best Battery Load Tester for Your Car
How Do I Know If My AGM Battery Is Sulfated
Sulfation occurs when lead sulfate crystals form on the battery plates, hindering performance.
Low Voltage
Consistently low voltage readings, even after a full charge, can indicate sulfation. A sulfated battery might show a voltage drop under load, failing to maintain a stable voltage.
Reduced Performance
If your battery does not hold a charge well or discharges quickly, it could be due to sulfation. You might notice your car’s electrical components functioning poorly, such as dim headlights or weak radio signals.
Visual Inspection
Check the battery for white, powdery residue on the terminals, which can indicate sulfation. Additionally, look for any signs of bulging or leaks, as these are also symptoms of severe sulfation.
Tester Results
Devices like the BST600 can diagnose sulfation by assessing internal resistance and capacity. High internal resistance often points to sulfated plates, reducing the battery’s efficiency and lifespan.
ANCEL BM700 Full System Car Scanner CBS ABS ASC Reset For BMW
$139.99
What Voltage Is 50% of an AGM Battery
Knowing the state of charge is vital for battery maintenance. Here’s a quick voltage reference:
- 100% Charged: 12.8 to 13.2 volts
- 75% Charged: 12.4 to 12.6 volts
- 50% Charged: 12.2 volts
- 25% Charged: 11.9 volts
- 0% Charged: 11.8 volts or lower
At 50% charge, an AGM battery typically reads around 12.2 volts. Maintaining the battery above 50% can significantly prolong its lifespan and performance. Regularly monitoring the voltage can help prevent deep discharges, which are detrimental to AGM batteries.
What Will Ruin an AGM Battery
AGM batteries are robust but can be damaged.
Overcharging
Overcharging can lead to overheating and thermal runaway, causing irreversible damage to the battery. It can also cause the electrolyte to evaporate, reducing the battery’s capacity.
Deep Discharging
Repeatedly discharging below 50% can cause sulfation and reduce capacity. Deep discharges strain the battery, leading to increased internal resistance and reduced efficiency.
Incorrect Charging Voltage
Using a charger with the wrong voltage setting can damage the battery. Always use a charger designed for AGM batteries to ensure proper charging voltage and current.
Extreme Temperatures
Both high and low temperatures can negatively affect the performance and lifespan of an AGM battery. Extreme heat can cause the electrolyte to evaporate, while extreme cold can reduce the battery’s ability to deliver current.
Poor Maintenance
Regular checks and proper charging practices are essential. Ensure the battery terminals are clean and connections are tight. Periodically test the battery to catch issues early and maintain its health.
Conclusion
Testing your AGM battery can be a straightforward process with the right tools, such as the BST600, which is highly recommended for accurate and detailed battery analysis.
This tool not only helps in diagnosing your AGM battery but also ensures you take the appropriate action to maintain its health.
ANCEL offers a variety of automotive tools, not just battery testers. They also provide car scanners, odometer adjustment tools, and injector cleaners.
For more detailed information and to explore ANCEL's range of automotive tools, visit the ANCEL.
FAQs
What should I do if my AGM battery is deeply discharged?
If your AGM battery is deeply discharged, you should use a smart charger designed for AGM batteries to recharge it slowly. Avoid using the vehicle’s alternator to charge a deeply discharged battery as it is not designed for this purpose and can cause further damage.
Is it normal for an AGM battery to get warm during charging?
It is normal for AGM batteries to get slightly warm during charging, but they should not become hot. Excessive heat can indicate a problem with the battery or the charger.
Can I revive a dead AGM battery?
Reviving a dead AGM battery depends on the extent of the damage. If the battery is only mildly sulfated, a specialized desulfation charger might help restore some capacity. However, if the battery is severely damaged or has a dead cell, it’s usually more cost-effective to replace it
Recommended Similar Articles：
- CCA of a Battery: Essential Knowledge for Every Driver
- Different Squeaking Noises: How to Identify Car Problems by These Sounds
- Simple Guide to Car Battery CCA Meaning
- Why your car battery died and how you can prevent it from happening again
- What is an AGM Battery and what are its advantages?
